Відео

Hello Mike. I just zeroed my TPS following your video. Then at the end it says to contact you if you are setting your tps and have the RX-1. I have the RX-1 Pro in my 2017 KTM 500 EXC-f. Is the procedure different?

😅

Cool!

Hook me up!

With all these mods and added weight, I think it would be better at this point to get a 701.

I want one. Awesome!!

Motoz Tractionator ________? You should know the name of the product you sell.

When will us early adopters of the 2024 GET be able to purchase the LED Map switch???

Great build!

Such an incredible job Mike! I’ll take you up on this service sooner than later I hope. Well done. 🏍️💨

Good video. I especially like that the meter is on the diode setting instead of resistance. But meh, still a quality myth busting.

like the paint dabs on the bolts and screws

Oh man. Riding out of LV in mid June? Little caliente.

sure would be AWESOME to be able to tune a beta 500 like this!

I really love the light on this bike! I’m second guessing my TacoTower…still can’t get power to the USB and GPS units. I absolutely love the bike though! I rarely use my “race” map as the traction control and map 2 is perfect for 85% of my riding

Sounds & Frequencies are devastating to humans -n- animals alike..... proof of this is in the sound/frequency weapons that've been created. But the sounds of your bike of time can wear you out.... it's not relaxing like a mountain stream... lol, good video

Is there anything for the XC-W versions?

What kind of cost are we looking at for these upgrades. I like the mods on this one? Is there any shipping of these bikes to your place or customer just plans the delivery and pick up?

Awesome!

Is there a kit like this for the 2024 350xcf? Thank you!

Really appreciate the keeping the exhaust quiet mantra.

Cost to replicate this exact bike/build? Bike: Parts: Labor:

I’m sure he’ll be thrilled. I’m not a 500 or KTM guy, but I’d ride that clean bike anywhere. Great service and thumbs up for promoting reasonable db levels.

I believe it was back in 2019, while following RTWPaul on ADVRider, that I read why Paul used a paint pen to mark the correct location of all the fasteners on his bike builds. I quickly did the same on my ADV and DS bikes, and I have found doing so was great for quickly confirming all is well on week-long trips, including Baja. But having the front and rear fasters clearly marked at the correct torque setting makes it much easier and faster to remove and replace wheels while on the trail. When back home, I will back off faster(s) I removed and torque them to factory spec. However, I have yet to adjust the paint marker position, so I know the trail work was 100%. Now, all my riding buddies are doing the same. If needed, we can remove or adjust almost part of the bike in the field and feel confident that all the fasteners will be almost perfectly torqued back to spec.

I’m kind of into the rat rod look.

Hey Mike @tacomoto, if I could make you a recommendation, it would be really awesome if you would take the time to list what the add ons are in the description, w/ links to order them. I believe it would increase your sales, considering I would be clicking and purchasing them myself. But I’m left being confused because I can’t find what your selling so I can’t spend money

What is HP of previous gen (I have 23) with GET?

Anything for the XC-W bikes?

What size tank?

Loud pipes sap lives???😂

Smog/Reeds delete?

Out of curiosity, what does a Taco modified KTM 350 EXC-F put out at the rear wheel in terms of HP? Assuming you’ve done one for a customer. Did you install your new fuel pump system to get all the fuel out of the tank? Thanks for another great build!

Another great video and build! Gives plenty of ideas.

I just wish we could get an opportunity to see these bikes in action

Terrific build! I love the HDB bark busters and mirrors. Are you doing engine rebuilds?

Another sick bike! The minimal builds definitely have value. Enjoying my 24’ and have been running the factory seat so far.

As an old school printer I love you print the manual for your customers.

Are these street legal or can they be turned into a street legal bike ?

Nice kit but here is Australia we have to have 300mm between our rear indicators. 😔

Great video and thank you for sharing. Do you ever have any starting issues from cold. Getting the s model this Tuesday but I heard some stories about starting the bike is a pain???

the screen is still in there it's just not connected!

Many thanks to you my dear friend. I just fixed my KTM 250 EXCF with your video guide. My fuel pump relay was the problem. I renewed i, and it works just fine 😊🙏

Is this available now for the 2024 KTM EXC-F 500? I have installed an Acerbis 4 gal tank and would like to update the pump with your Snorkel pickup.

Why is there not a link on this to click to buy?

Sounds like you need wind shock spring back n ease comp damping to make it steer like it should

YOUR PUTTING IT ON THE OUTSIDE OF THE CONNECTION AND THAT MIGHT BE FINE FOR A ONE TIME CONNECTION BEFORE HAND BUT LET'S USE LOGIC. IF YOU HAVE A TRAILER PORT AND PLUG THAT YOU ARE REPEATEDLY TAKEN ON AND OFF ; AND FROM THIS OF COURSE THE CONNECTORS OVER TIME GET LOSE AND LET'S SAY, LET'S JUST SAY THAT A GAP FORMS AND FROM THIS SLIGHT GAP ELECTRICITY CAN STILL EASILY JUMP ACROSS FROM METAL TO METAL. BUT IF YOU PUT IN BETWEEN THAT GAP A CRAP LOAD OF NON LET ME SAY IT AGAIN CRACKPOT AS YOU SO CALLED YOURSELF , NON CONDUCTIVE MATERIAL IN THIS CASE DI-ELECTRICAL GREASE THEN THIS NON CONDUCTIVE MATERIAL, HENCE WILL NOT , LET'S SAY AGAIN WILL NOT ALLOW AN ELECTRICAL CONNECTION. IT'S THAT SIMPLE. HELL TO GO ONE EVEN FURTHER YOU DEMONSTRATED IN YOUR OWN VIDEO WITH YOUR MULTI METER. WHAT HAPPENED WHEN YOU YOU TOOK THE MULTI METER AND PUT TWO METAL PRONGS ON THE DI- ELECTRICAL GREASE , AH I DON'T KNOW , NOTHING ABSOLUTELY NOTHING, WHY BECAUSE ONCE AGAIN IT'S NON CONDUCTIVE. SO QUIT BEING NAIVELY IGNORANT THINKING THAT YOUR APPLICATIONS APPLY TO ALL THAT'S JUST BEING STUPID PURPOSELY.

Do you have a parts list?

as an Aussie i’m stoked and love the Yenkro tower…small and compact, doesn’t scream adventure rider….breakaway screen in genius! A suggestion would be an enduro screen that could be put on for singletrack/enduro that just covers the body of the tower….

Nothing like spending 10k on a 14-15 k bike. Looks sweet tho

Hey mate where would I be able to source some ktm 530 upgraded oil pump gears? I mean to say do you know if they make upgraded gears for this model still? Thanks.